Are you looking to explore the Cricut machine with new craft opportunities? Visit cricut.com/setup and read the guideline to set up your machine for different tasks. Here, we will tell you how to use your machine properly to create projects or clean the cutting mat. Let’s get started with cricut.com/setup to download and install the essential on your desktop or smartphone.

How to Use a Cricut Machine to Create Projects?

In order to use a Cricut Machine to generate projects, you are required to set up your machine. Here is a step-by-step guide for using your Cricut machine with ease.

1. The first step is to choose a material for cutting.
2. After that, take out the Cricut product’s sticky mat.
3. Place your cutting material on the Cricut cutting mat.
4. For a flawless design, the mat will control the material in the proper position.
5. Download the Cricut Design Space at cricut.com/setup.
6. Select a design from the Cricut app or software.
7. Go to cricut.com/setup and download the Cricut Design Space to start creating designs.
8. Send the design to the machine after selecting a material.
9. Press the button on the top of the Cricut machine.
10. Once the machine has completed cutting the material, you can remove the mat.
11. Remove the material off the mat in the same way.

How to Clean a Cricut Mat to Make It Adhesive Again?

If you are cutting materials with a knife blade, then you are about to witness dust or debris on the mat. It is more likely that the debris and dust will stick to the adhesive on your cutting mat. To help and increase the life of the StrongGrip mat, clean it as the following step suggests:

1. Start removing the large debris with tweezers.
2. The next step is to avoid scraping the mat.
3. Scraping might push material deeper into the adhesive.
4. Then, wash the Cricut cutting mat as the below steps suggests:
   1. Keep your mat flat, supported by a strong surface, and position it in the sink.
   2. Next, pour lukewarm water over the cutting mat.
   3. Take a plastic, hard-bristled brush and gently run in a circular movement.
   4. Rub the mat until the entire mat surface is cleaned.
   5. After that, pat dry with a paper towel.
   6. In the end, let your mat completely dry for the stickiness to return.

Note: It is recommended to clean your Cricut cutting mat after two or four cutting projects. The life of the cutting mat is based on the materials cut on it and how often it is cleaned. Also, change your mat once the mat loses its stickiness rather than trying DIY tricks. It may cause the machine to jam and will cause a big loss to you. Check out cricut.com/setup to get a perfect cutting mat for your machine.

How to Make a Stencil with Cricut Machine via Cricut.com/Setup?

If you are preparing to make a stencil with your Cricut machine, you might as well explore Cricut Explore or Cricut Maker series Machines via cricut.com/setup. With standard mats, you can make stencils up to 11.5” long and 11.5” wide. Here is how to make a stencil with the Cricut machine.

1. Open an internet browser on your device.
2. Go to the official website via cricut.com/setup.
3. Download the Cricut Design Space app or software.
4. Next, you need to upload your own image.
5. Now, start designing stencils in the Cricut Design Space.
6. After that, cut the stencil material via your machine.
7. Tap the green “Make it” button in the top-right corner.
8. Now, your stencil material is ready via the Cricut machine.

To check more stencil materials, visit cricut.com/setup and explore the options you have got to create projects.

How to Curve Text in Cricut Design Space via Cricut.com/setup?

Use the Curve Tool in Cricut Design Space to easily flex your text into a circular shape. The Curve Tool can be located in the Text Edit bar. The text bar will be visible at the top of the Canvas, between the Alignment and Advancement tools.  Here are the instructions on how to Curve Text in Cricut Design Space.

1. First of all, visit the official website via cricut.com/setup.
2. Then, download Cricut Design Space on your desktop or smartphone.
3. Launch the Design Space app or software.
4. Tap the Text tool in the Design Panel to the left of the Canvas.
5. Provide the text into the text box, and select your font and font style.
6. Use the Letter Space tool to change letter spacing as required.
7. In case you are using multiple lines of text to bend, enter each line of text in a different text box.
8. Or you can use the “Ungroup to Lines” tool to separate all of the text boxes.
9. Tap on the Curve tool in the Cricut Design Space.
10. Now, Design Space will take a few moments to analyze the text for spacing and size.
11. Then, it will display a slider and a number field.
12. After that, drag the slider to the right to bend the text low.
13. Next, note the number in the Diameter box as you pull the slider.
14. Design Space will use an imaginary circle to check the curvature of the text.
15. The number in the diameter box will change as the slider is pushed.
16. Then, pull the slider to the left to curve the text on the upper side.
17. You will see that a “-“ is added to the number in the Diameter box.
18. The number addition will indicate the upward curve.
19. If you are curving multiple lines of text, quickly match the curvature of previously curved text by manually entering the same number in the diameter field.
20. If you need to curve the text in the opposite direction, remove or add a dash.
21. Finally, you need to tell Design Space which way to curve the text.

How to Download Fonts to Cricut Design Space?

You will discover many places to find paid and free fonts to download. You can easily find free fonts on Google or Dafont. And if you require to use high-quality fonts, install Creative Fabrica or Creative Market. One of the best ideas is to download fonts via Cricut Design Space. Let’s see how you can download and access the fonts in Cricut Design Space.

1. Go to the preferred website to download the fonts.
2. Then, check the folder in which you have downloaded the font.
3. Next, you need to unzip the font file folder.
4. After that, double-click on the individual font file.
5. Usually, font files end in .otf or .ttf. It is recommended to install the .otf file.
6. Follow the prompts on your screen to install the font file.
7. After the font is installed, open Cricut Design Space.
8. Create a new project and add a new text layer.
9. Choose the text tool to add a new text tool to your Canvas.
10. Then, you need to click on the font drop-down menu.
11. You can locate the menu in the top toolbar to change the font.

FAQs

What do you require to get started with a Cricut?

Cricut Essentials to Get Started:

1. Cricut Machine
2. Cricut Cutting Mats
3. Cricut Design Space from cricut.com/setup
4. Cricut knife blades
5. Required Materials to cut
6. Crafting/ Weeding accessories kit.

How do you upload a font?

Upload a Font to Cricut (Cricut.com/setup):

1. Turn off any software in which you want to use the font.
2. Download the font to your computer and, if necessary, open zip files.
3. Choose "Open" from the context menu when you right-click on each font you want to add.
4. To install the font on your computer, open it and click "Install."

How do you download fonts to the Cricut app?

1. Go to Design Space and open the Cricut Access.
2. Pick a style of font.
3. Enter the name or phrase you will use in this new font in the Preview section.
4. Scroll via fonts till you get the perfect one.
5. Choose Download.
6. Save where you can recollect.