Diamond Drilling London5-Star Rated

Diamond Drilling London5-Star Rated

Core Drilling

Core Drilling

Cutting smooth holes as small as 12 mm to as big as 1 metre in diameter.

Core Drilling

Demolition Services

Demolition Services

With Brokk and a 360° excavator up to 10 tonnes, we can demolish in confined spaces and large structures.

Demolition Services

Wall Sawing

Wall Sawing

Clean cuts up to a depth of 1000 mm in reinforced concrete, vertically or horizontally.

Wall Sawing

Floor Sawing

Floor Sawing

Cutting depths of up to 500 mm in a range of materials, including reinforced concrete.

Floor Sawing

Any MoHS rating

Diamond Drilling LondonDrillers

At BC Diamond Drilling & Sawing Ltd, we pride ourselves on our reliability, punctuality and exemplary sawing and diamond drilling in London and across the South East at highly competitive prices.
bc diamond drilling london van unloading floor saw
bailey the owner of bc diamond drilling london
bc diamond drilling london van parked
bc diamond drilling london flood protection cutting

100% Customer Satisfaction

We only leave the site once you're 100% satisfied with the job.

Maintained Equipment

You can rely on us to get the job done because our equipment is heavily maintained.

Less Disturbance with 24/7 Operation

Are you concerned about disruptions? Just let us know when it's best to be on site.

Site-Ready Team at Short Notice

Our team is highly qualified, trained and experienced, and we are waiting for your call.
Core Drilling

Core Drilling

Creating holes from 12 mm to 1 metre in diameter.

Core Drilling

Wall Sawing

Wall Sawing

Cutting into walls at a depth of up to 1000 mm.

Wall Sawing

Floor Sawing

Floor Sawing

Cutting into floors at a depth of up to 500 mm.

Floor Sawing

Stitch Drilling

Stitch Drilling

Creating overlapping holes of at least 12 mm in diameter.

Stitch Drilling

Wire Sawing

Wire Sawing

Cutting reinforced concrete at unlimited depths or 360° circular cuts up to 2.5 m.

Wire Sawing

Ring Sawing

Ring Sawing

3-phase electrical ring sawing in very, very tight spaces.

Ring Sawing

Controlled Demolition

Controlled Demolition

Concrete crunching, concrete bursting, and Brokk demolition.

Controlled Demolition

All Solutions

All Solutions

Are you unsure if we're able to do what you require? Take a look at our all solutions.

All Solutions

diamond drilling contractor london projects
Qualified, trained & experienced

Why Choose Us?

At BC Diamond Drilling & Sawing Ltd, we hold industry standard qualifications and training combined with years of experience. We're also CHAS® Accredited, Alcumas® Accredited and PASMA® Certified. Working with us ensures your project stays on track without any unnecessary delays.

Bailey Oliphant, Managing Director

baileys signature
K Q
17/12/2023
This company did an amazing job for us. They were very professional and reliable. Highly recommended and would definitely use again.
Grace L
12/10/2023
BC Diamond Drilling & Sawing is awesome! They're spot-on with communication, super professional, and keep things tidy. Definitely recommend it. Thank you team!
Roham Haddadi
09/09/2023
Very professional and great expertise. I booked them very last minute to drill 2 holes for an AC unit and they were very accommodating; great communication the day before, arrived on time in the morning, and did an excellent job. Even stayed longer to help install the AC. Would definitely recommend them!
James Regan
02/03/2023
Very professional and knowledgeable team. Helped us on a tricky site and were absolutely great. Would definitely use again.
sean fitzgerald
10/10/2022
Best contractors I’ve had on site, I’ve used Bailey and his guys on a number of jobs and every time they deliver on time and always leave my sites in perfect condition.
Cali Pax
16/05/2022
Used on numerous jobs even undershirt notice very Professional service left my site clean and tidy unlike no other drilling or sawing company I’ve used before big thank you to Bailey and the Bc diamond drilling team always a pleasure look forward to using you guys again
Jim Wright
12/11/2021
I have used Bailey on numerous jobs over the past few years . He has always taken care of anything I have thrown at him in an amazing time scale . I would have no hesitation in recommending him .
Oli Fink
25/10/2021
Bailey and his team were ready and available at a moments notice to attend my job in central London over the weekend. The job was not straight-forward but they worked around the problems and successfully core drilled out all holes as required. Would definitely recommend and will keep their details for future works.
Ring Sawing 280mm into Reinforced Concrete Wall for Doorway in Mayfair
Ring Sawing 280mm into Reinforced Concrete Wall for Doorway in Mayfair
BC Diamond Drilling & Sawing Ltd received a phone call from Zona Construction who required wall openings on a project in Mayfair, London. The walls in question were 280mm thick brick, so we used a solid saw to cut 165mm deep first. Once the initial cut was completed, we used our 3 phase power ring...
Concrete Shuttering Wasn’t Bolted Correctly
Concrete Shuttering Wasn’t Bolted Correctly
BC Diamond Drilling & Sawing Ltd was called out to Lincolnshire by OBM. We were called out because a wall and concrete shuttering wasn’t bolted up properly. So, we had to cut it out, so they can rebuild it correctly. Conducted track sawing and brokk demolition through 450mm reinforced concrete walls of 4.5m wide by...
10 127mm Diameter Balcony Drainage Holes in Islington
10 127mm Diameter Balcony Drainage Holes in Islington
BC Diamond Drilling & Sawing Ltd recently drilled 10 holes of 127mm diameter through 350mm thick reinforced concrete slabs for balcony drainage in the London Borough of Islington.
One Stop Solution Diamond Drillers
One Stop Solution Diamond Drillers
Modus Construction Consultants urgently contacted BC Diamond Drilling & Sawing Ltd to create an opening. We needed to prepare the Hastings site efficiently because bricklayers were due to arrive the following week in order to start building 5 blocks of flats. We cut 550mm deep straight edge using the track saw through reinforced concrete slabs....
250mm Depth Floor Sawing 120m Down a Road
250mm Depth Floor Sawing 120m Down a Road
BC Diamond Drilling & Sawing Ltd was asked by Cappagh Browne to cut down the middle of a 120 m depot road.
1.3 m by 2.4 m Wall Opening in a Flat Next to London Victoria Train Station
1.3 m by 2.4 m Wall Opening in a Flat Next to London Victoria Train Station
A resident of a flat close to London Victoria train station contacted BC Diamond Drilling & Sawing Ltd to create a wall opening. 
21 Diamond Core Holes of 107 and 200 mm
21 Diamond Core Holes of 107 and 200 mm
On 2nd February 2024, BC Diamond Drilling & Sawing Ltd received a call from Banks Development Limited for two diamond drillers in Richmond, London.
Creating an Opening for a Staircase
Creating an Opening for a Staircase
When it comes to construction, precision and efficiency are key elements that can make or break the success of the project. One such example project is cutting a 6-metre by 3-metre opening in a 150 mm reinforced concrete floor for a bespoke staircase installation. The task demanded careful planning, suitable tools, and attention to detail.
Diamond Drilling for Water Table Investigation Report
Diamond Drilling for Water Table Investigation Report
The project was commissioned in June 2023 by Groundtech Consulting Limited, who are based in Lancashire. The company provide a range of geo-environmental consultancy and engineering services. In this case the location for the project was at the other end of the country in Eastbourne East Sussex.
Diamond Drilling for Air Conditioning Ducting
Diamond Drilling for Air Conditioning Ducting
Recently BC Diamond Drilling & Sawing Ltd were commissioned to carry out some diamond drilling in London at a premises in preparation for the installation of an extensive air conditioning ducting system. The project was being run by London Projects, which are based in central London and are routinely managing a range of redevelopment projects across the capital.

You can trust us to complete the projectWhy Choose Us for Diamond Drilling London

30 Years of Combined Experience in Managerial Diamond Drilling London

BC Diamond Drilling & Sawing Ltd has over 30 years of combined managerial experience, so you can trust us to manage any diamond drilling or sawing project efficiently.

From site preparation to compliance with industry regulations and standards, we’re renowned for our meticulous approach, ensuring all clients are 100% satisfied from day one.

Highly Trained & Skilled Drillers in Our Team

In addition to our extensive experience, all our drillers are highly trained to perform all drilling and sawing services. This includes proudly holding a Level 2 NVQ Diploma in Specialist Concrete Occupations certificate.

Furthermore, our team members are qualified to handle asbestos safely, test face-fit masks, and operate a 360 excavator up to 10 tonnes.

Additionally, we hold the following accreditations: Site Supervision Safety Training Scheme (SSSTS) and Site Management Safety Training Scheme (SMSTS).

With years of experience, qualifications and training under our belt, BC Diamond Drilling & Sawing Ltd makes an ideal contractor to partner with on your project.

Well-Maintained Diamond Drilling & Sawing Equipment

BC Diamond Drilling & Sawing Ltd guarantees a reliable and consistent service. A predominant factor is providing an exceptional service that our clients expect with maintained and up-to-date industry standard equipment.

Moreover, we frequently maintain all our equipment, including servicing and Portable Appliance Testing (PAT), so that our service delivery is effective and efficient with high levels of safety.

Well-Versed in Various Projects

BC Diamond Drilling & Sawing Ltd has been contracted to provide drilling services in various domestic and commercial settings across the capital city.

For example, we have assisted on construction sites, roads and railways, bridges and tunnels, water treatment plants, historic buildings and infrastructure.

The diverse range of projects for which we have provided diamond drilling makes BC Diamond Drilling & Sawing Ltd one of the most suitable contractors for your project.

Peace of Mind

BC Diamond Drilling & Sawing Ltd’s extensive experience enables us to provide estimates with greater accuracy for our involvement in projects requiring diamond drilling.

In addition, we work closely with our clients from day one to ensure our service is not only complete, but to 100% satisfaction.

Competitive Pricing

We offer highly competitive pricing for our years of experience and training based on a day rate for operatives plus additional fees for parking and congestion.

We can accept Visa, Maestro, Visa Debit & MasterCard via the Barclaycard Anywhere service.

diamond core drill drilling at angle